We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum Forums Discuss Simulation Fluids ANSYS AQWA – Questions on Froude Scaling Reply To: ANSYS AQWA – Questions on Froude Scaling

S.S.S.ShankaVasuki
Subscriber

Ah okay 

 

But in the time domain analysis for the full scale model I used a time step of 0.1s and the run time of 1000s.

 

I have used the same for the scaled down model as well. So my question is do I have to scales these down by sqrt(10) such the time step would be 0.03s and the duration of simulation would be 316s?

Â