Learning Forum

[Andrei F L]

I am using PyMAPDL 0.68.4 to interact with Ansys Mechanical APDL 2024R2, in order to study Nonlinear Buckling of Stiffened Plates.

I am receiving some errors of the solver, which in GUI ends the analysis but the data is still avaiable to check out. In PyMAPDL, in other hand, I am not being able to do that, because the gRPC connection closes when it receives an error from the solver.

Is there a way to make PyMAPDL not close the gRPC connection when a error occurs in SOLVE?

I need to obtain the calculated values in the SOLVE step, but when an error occurs, such as an "Element 3600 has excessive thickness change", the gRPC connection closes and I am not able to extract any values from it.

Is there a way to do that in PyMAPDL?

[Erik Kostson]

Hi

Write in PyMAPDL (github sites), depending what you want to do and where to do this.

(e.g., pymapdl questions: https://github.com/ansys/pymapdl/discussions)

The forum here is for mechanical/apdl general type of questions (not pyMAPDL)

All the best

Erik