Mechanical 2024 – Plot issue

- September 10, 2024 at 9:22 am
  
  jonas.santin
  Subscriber
  
  I've run a simulation in Ansys Mechanical 2024, but the deformation plot isn't working correctly. When I use the "adjust to visible" option, the deformation values in the legend convert from mm to m. For example, instead of showing 0.54 mm, it displays 0.00054 m. Does anyone know how to fix this?
  Thanks
- September 10, 2024 at 9:28 am
  
  Erik Kostson
  Ansys Employee
  
  Hi
  Which version are you using?
  If it is R1, download and install R2 (2024).
  All the best and perhaps that resolves it
  Erik
- September 10, 2024 at 9:35 am
  
  jonas.santin
  Subscriber
  
  Here are the plots before and after clicking on "Adjust to Visible".
  Before:
  
  After:
- September 10, 2024 at 9:37 am
  
  jonas.santin
  Subscriber
  
  Hi Erik,
  
  Thank you for your response. Yes, I'm currently using R1.
  I'll check if the issue is resolved with R2.
  - September 10, 2024 at 10:07 am
    
    Erik Kostson
    Ansys Employee
    
    Yes do that - should be ok in R2.