Ansys Learning Forum › Forums › Discuss Simulation › LS Dyna › *** Error 40058 (SOL+58) retractor 1000002:convergence failure at time1.01E+02 › Reply To: *** Error 40058 (SOL+58) retractor 1000002:convergence failure at time1.01E+02
September 3, 2024 at 2:32 pm
Ram Gopisetti
Ansys Employee
Hi Abraham,
This error can be triggered if the material type and/or load curve used in pull-in and pull-out for retractor may have a problem. Please check and make sure there is no unrealistic values set.
Cheers,Ram