Learning Forum

[Yacoby Woo]

If two closely contacted cylinders of different materials to be penerated from outerside are created with the lagrange solver here, the modeling can not operate correctly since the gap does not meet the requirement. Using the "Convert IJK Parts to Unstructured"  under the import command may solve the problem. I am wondering whether I should select all the three options available and what is the difference if not so. (the sketch of the contacted cylinders to be penetrated) (the three available options)

 

[Erik Kostson]

Hi

I would suggest to post this in the LS-Dyna forum/

 

Erik