We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › LS Dyna › ICFD Mesh error: Surface Collapse not possible to locate › Reply To: ICFD Mesh error: Surface Collapse not possible to locate

August 14, 2024 at 6:51 pm
arnau994
Subscriber

Hello Reno,

Thank you very much for your detailed response and the feedback the developer will provide.

I have attached below one of the surface mesh iterations, where I tried a coarser mesh on the wing (FSI interaction surface) and a finer mesh on the fluid domain to balance both element sizes. At the moment I don't have any boundary layers, adaptive meshing or any other kind of features (I think that the boundary layer is volume-meshed automatically?). I have also tried to attach the .k file with only the mesh in case it could be helpful, but I have been unable to do so.

Surface Mesh Layout

To be honest, I didn't try to deep-refine the mesh, as I understood that a higher element count would be detrimental for the solver. I will try it and keep you updated. Same for the volume mesh workaround.

Thank you for your time. I really look forward to hear from the developer.

Arnau