Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.

Ansys Learning Forum › Forums › Discuss Simulation › General Mechanical › Creating no-penetration contacts for objects in modal acoustics › Reply To: Creating no-penetration contacts for objects in modal acoustics

August 9, 2024 at 3:34 pm
DevenM
Subscriber

 

Hi Kaushal,

 

  1. I am performing modal acoustics analysis
  2. The goal is to see the modes for a fluid sloshing inside a spherical diaphragm tank. See Image attached from [Sabaghzadeh, 2021]. The fluid is modeled using FLUID221 acoustics elements and the rest of it is solid. As you can see there is a large gap between the diaphragm (inside the tank) and the tank upper half. The other side of the diaphragm (lower side) is filled with fluid. So I am trying to create a contact between the diaphragm upper surface and the tank upper half section so that the diaphragm does not go out of the tank in any of the modes.
[bingo_chatbox]