Ansys Innovation Space

FREE STUDENT SOFTWARE

The mesh generation did not complete due to poor quality elements – ANSYS2024R1

- July 18, 2024 at 9:20 pm
  
  Łukasz Ruba
  Subscriber
  
  Hello,
  after reinstall system and install new Ansys 2024 (before I had 2023 version) I have this problem:
  The mesh generation did not complete due to poor quality elements or incorrect input. Please try meshing with another mesh method or different mesh options.
  I had a lot of problems with new Ansys version, so I have made new windows 11 acount. Despite reinstaling Ansys few times I still have the same problem. Additionaly I done instruction from this post: Try to mesh a simple geometry (e.g. a cubic) in Workbench Mechanical on Windows, get a misleading error of “The mesh generation did not complete due to poor quality elements or incorrect input. Please try meshing with another mesh method or different mesh options". - Ansys Knowledge
  but it doesnt work.
  What should I do now? Geometry was created in SpaceClaim.
  Best regards,
  Lukas
- July 19, 2024 at 1:57 pm
  
  Erik Kostson
  Ansys Employee
  
  Hi
  It could well be something complex like mentioned in the link you show.
  I would install the latest 2024 R2 which works fine for me on Windows 10 (never tried Windows 11).
  If the error still persists, in Mechanical and under Mesh Details, Quality, and Check Mesh Quality, set that to No (but perhaps this does not help if the error is related to the link you show).
  
  thank you
  
  Erik

Viewing 1 reply thread

The topic ‘The mesh generation did not complete due to poor quality elements – ANSYS2024R1’ is closed to new replies.