Learning Forum

[Ailin Chen]

Hi:

I am trying to use Windows Powershell to automatically execute lsdyna cfile ( have successfully executed the input k file using i=input.k) but also run into error and issue. Here is what I call
Setting the environment: ANSYS_DIR=D:\Program Temps\ANSYS Inc\v211\ANSYS
Executing "D:\Program Temps\ANSYS Inc\v211\ANSYS\bin\winx64\lsdyna_sp.exe"  c=lspost.cfile
And seems like lsdyna.exe is opened but get the following:
forrtl: severe (64): input conversion error, unit -5, file Internal Formatted Read
Image              PC                Routine            Line        Source
lsdyna_sp.exe      00007FF79B23777D  Unknown               Unknown  Unknown
lsdyna_sp.exe      00007FF79B1F0619  Unknown               Unknown  Unknown
lsdyna_sp.exe      00007FF7955BE6E4  QLINK                     689  atemp.F
lsdyna_sp.exe      00007FF7954D20B0  LSDYNA1                   598  dynm.F
lsdyna_sp.exe      00007FF7954D1D33  MAIN__                   1752  dynm.F
lsdyna_sp.exe      00007FF79E2B40DE  Unknown               Unknown  Unknown
lsdyna_sp.exe      00007FF79EE6DA00  Unknown               Unknown  Unknown
KERNEL32.DLL       00007FFCB4EB7344  Unknown               Unknown  Unknown
ntdll.dll          00007FFCB607CC91  Unknown               Unknown  Unknown
Press Enter to exit:
And idea how to solve this? Or how can I ask lsdyna to run multiple cfiles without going into the GUI? Thank you!

[Ushnish Basu]

 

The command-line parameter “c=lspost.cfile” is for LSPP, not LSDYNA. For LS-DYNA, you will have to provide an input file using “i=input.k”