We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Electronics › Question Rmxprt and Maxwell › Reply To: Question Rmxprt and Maxwell

May 28, 2024 at 6:49 am
NKC
Ansys Employee

Hi el min,

If your phase winding has 7 turns and the wire used for each turn is 0.55 mm then, you need to use 0.55 mm as the diameter of the wire with the number of strands as 1.

If your phase winding has X turns and each turn is made of 7 wires of 0.55 mm diameter then, you need to use 0.55 mm as the diameter of the wire with the number of strands as 7.

 

Regards,

Navya