Learning Forum

[JUGYEONG SHIN]

Hello all,

I have a questions about parameter of Discovery.

 

How can I define parameter for the specific angle?

Up to the 2021 version, when the Move function was used, the parameter for the angle could be defined. There was also an example video of the Ansys.

However, recently, if I activate the move function and select the angle, I can't see the parameter button, and if I select the direction, I can see the parameter button.

I want to compare the results according to the angle change of the body.

I want to know if the angle can no longer be defined as a parameter. And if it can be defined, I would like you to show me how or an example.

 

Best Regards,

Jugyeong Shin

[Atharv Joshi]

Hi Jugyeong,

Can you please try selecting faces and then try move operations?
Please refer to below image. 

Thanks and Regards
Atharv

[JUGYEONG SHIN]

Hello Atharv,

I tried as you said, but I can't see the Parameter button.

Just like you, I selected the faces using Box Selection with the Face Filter and tried to use Move Tool, but the Parameter button doesn't appear as shown in the picture below.

What else can I do?

Best Regards,

Jugyeong Shin

[Atharv Joshi]

Hi Jugyeong, 

Can you please select single angular direction and then rotate? 
This greys out the other direction for motion.  

Thanks and Regards
Atharv

[JUGYEONG SHIN]

 

Hello Atharv,

Thank you for your answer.

I did same as you did(select single angular direction and then rotate) but the Parameter button didn’t appear as shown in the picture below.

(I did it on my collague’s computer, but there was no difference.)

Is there any option to turn on to use parameter?

Best Regards,

Jugyeong Shin

 

[Atharv Joshi]

Hi Jugyeong, 

Can you try installing the Service Pack and check if it solves the problem?

Thanks and Regards
Atharv

[JUGYEONG SHIN]

Hello Atharv,

 

I tried to install the Service Pack(2024R1.02), but the problem is not solved.

Is there another way to solve this problem?

 

Best Regards,

Jugyeong Shin