Axial flux PM generator

- March 22, 2024 at 10:22 am
  
  Atanas Hristov
  Subscriber
  
  Hello,I tried to construct Axial flux PM generator but result does not open. Please clarify if the software calculates a generator or just a motor.
- March 26, 2024 at 8:17 pm
  
  GLUO
  Ansys Employee
  
  Hi,
  Please right click Results>>Solution data. It shows which setup you are viewing. The opeation type is defined in your setup.
  GL
- March 27, 2024 at 7:45 am
  
  Atanas Hristov
  Subscriber
  
  Please read carefully the question I am asking you.
  You can see that the software does not work in generator mode.
- April 1, 2024 at 2:55 pm
  
  HDLI
  Ansys Employee
  
  Hello Atanas Hristov,
  In the bottom of above picture (Design sheet), there is "Note: Performance results are not provided at present for this machine structure. The user will need to modify the source setup in RMxprt-created Maxwell designs.", so RMxprt would not support this design and it is just a geometry model without results.
  Please create Maxwell design to simulate it. With machine type of "generic rotating machine", we have to check and see if it is just a geometry model, because several machine simulations in RMxprt would not support in this option.
  HD