Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.

Ansys Learning Forum Forums Discuss Simulation LS Dyna effetive stress vs strain curve not as expected Reply To: effetive stress vs strain curve not as expected

Jim Day
Ansys Employee

NIP=3 should also work.   Just be sure to set MAXINT=3 if ELFORM=2 and if ELFORM=16, because there are 4 in-plane integration points, set MAXINT= -3 so that data for each integration point is output to d3plot.

[bingo_chatbox]