We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › General Mechanical › Different Stress-Strain Diagram of RC Beam › Reply To: Different Stress-Strain Diagram of RC Beam

March 8, 2024 at 7:10 am
Rommel Jr. Landicho
Subscriber

Hi! Thanks for your help. I have tried adding the command. Although it changes the load deflection curve, there are still some drops. I tried varying the parameters and some variations remove the sudden drop, I am still trying to figure it out. However, I would like to ask another question regarding beam failure.

 

My model has fairly accurate results as compared with my reference load-deflection curve. However, I do not know how to determine when the beam will fail. In my reference study, the beam is supposed to crush due to flexure at a deflection of ~35 mm but my model continues to deflect at 50 mm (maybe even more if I increase my displacement control). How will I know if my model has failed due to flexure? What result will ANSYS give if my beam has crushed? Also, are there plots I can make to see its cracking or at least potential areas where cracking can occur? 

Thanks!