Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.

Innovation Space

FREE STUDENT SOFTWARE

SWEEP FUNCTION

- May 18, 2019 at 10:26 am
  
  angelo
  Subscriber
  
  Hi, I want to construct a cylinder-like geometry in design modeler. First I sketched the profile of the cone then I sketched the circumference and used the sweep function on the profile to follow the circumference. I have obtained the cone but inside this remain the sketch of the profile and whene I go for the mesh ( the cone is all fluid) I have the line inside the the fluid and near tht line I have high quality mesh but far of that line the quality decrease.
  
  How can I remove that line?
  
  Thank you
- May 18, 2019 at 4:04 pm
  
  peteroznewman
  Subscriber
  
  In DesignModeler, at the bottom of the outline, it shows a list of bodies. If you have a solid body that is the cone and a line body, select the line body and RMB to Suppress the line body. It will not transfer into meshing.
- May 18, 2019 at 5:12 pm
  
  angelo
  Subscriber
  
  No, I don't have any line body, I have only the solid body.
- May 18, 2019 at 7:19 pm
  
  angelo
  Subscriber
  
  Dear Mr. Oznewman
  
  I have made another geometry and this time I have create a surface from the sketch of the cone (I'm sorry I didn't mention the absence of the surface from sketch action in the first post). Now I have the surface you mentioned and I was able to suppress that. Now in the meshing I don't have the problem of HQ mesh near the construction line and LQ mesh far from that.
  
  Now I'm dealing with the mesh and this will be quite a challange. Thank you for your help.
  
  Kind regards

Viewing 3 reply threads

The topic ‘SWEEP FUNCTION’ is closed to new replies.

[bingo_chatbox]