We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Innovation Space

FREE STUDENT SOFTWARE

Harmonic Acoustics – Problems while setting Thermo-Viscous BLI Boundary

- January 29, 2024 at 6:03 pm
  
  André Henrique
  Subscriber
  
  I just can't set Thermo-Viscous BLI Boundary for the surfaces I want.
  The model is as follows, a tube filled with air and a structure inside. I want to place a Thermo-Viscos BLI Boundary condition on the surfaces where the solid interacts with the fluid.
- January 30, 2024 at 9:18 am
  
  Erik Kostson
  Ansys Employee
  
  Hi
  
  It can not be applied on a fluid solid interface (FSI), so on a face where the structure interacts with the acoustic region.
  The BLI goes only on outer faces of acoustic regions (not in contact with any structural bodies) – see as an example here: 41.5. Boundary Conditions and Loading (ansys.com) –
  
  See here if you can not open the above link:
  /forum/forums/topic/how-to-access-the-ansys-online-help/
  
  All the best
  Erik

Viewing 1 reply thread

The topic ‘Harmonic Acoustics – Problems while setting Thermo-Viscous BLI Boundary’ is closed to new replies.