How to draw a chart in CFD-post?

- February 22, 2019 at 5:47 pm
  
  hamda
  Subscriber
  
  Hi,
  
  I am supposed to show CFD results in charts (e.g. pressure vs axial direction(y), Temperature vs time ,.....). In fluent it is so easy but in CFX I can't do that. since I have to select a location and there is nothing to select.
  Also, I defined an expression for heat source as a function of time but I can't draw a chart for it yet.
  
  I'll really appreciate if someone help me on this issue.
  
  Many thanks in advance.
- February 25, 2019 at 10:59 am
  
  Rob
  Forum Moderator
  
  You'll need to create a line in CFD Post (look at Locations) and then insert a chart under results.
- February 26, 2019 at 4:02 am
  
  Keyur Kanade
  Ansys Employee
  
  following may help.
  
  https://www.youtube.com/watch?v=7gmS8_Nwq5c
  
  https://www.youtube.com/watch?v=Mv7w2PBkf8M
- March 6, 2019 at 2:56 pm
  
  hamda
  Subscriber
  
  Many thanks Dear rwoolhou and kkanade
  
  I did that.
  
  Since I have done an unsteady state simulation, I want to draw some charts to show the change of some parameters (e.g. temperature, Pressure,....) along the time, i.e. the X axis is time and Y axis is Temperature or pressure,..... But I don't know How.Any idea?
  
  Many thanks
  
  Hamda