solving issue

- January 27, 2019 at 4:40 am
  
  rishav100000
  Subscriber
- January 27, 2019 at 5:17 am
  peteroznewman
  Subscriber
  The error message tells you what to do.
  
  Check the material properties. What is the Young's Modulus (E) of the material assigned to this body?
  
  Check the cross-sectional area (A) assigned to this line body.
  
  Do the hand calculations:
  - Stress = F/A
  - Strain = Stress/E
  - Deformation = Strain*Length
  What answers do you get?
  
  Make sure you use consistent units.
- January 27, 2019 at 5:47 am
  
  rishav100000
  Subscriber
  
  i have used structural steel as material and the cross section is circular
- January 27, 2019 at 8:33 am
  
  jj77
  Subscriber
  
  Like Peter says and the solver it complains about pivots, so it could be something with material or cross sectional properties (or restraints). If you want, feel free to upload your model, and we can have a look for you.
- January 27, 2019 at 8:44 am
  
  rishav100000
  Subscriber
  
  thank you jj77 but the problem has solved i have just deleted the force and reapplied it then it worked
- January 27, 2019 at 8:51 am
  
  jj77
  Subscriber
  
  Great