Ansys Assistant will be unavailable on the Learning Forum starting January 30. An upgraded version is coming soon. We apologize for any inconvenience and appreciate your patience. Stay tuned for updates.
Hi, based on the pictures that you shared, I think you need 1 "step" and multiple "substeps". You are using a minimum and maximum time step of 1 s. So if the solver needs a smaller time step to converge, it can't use a time step of say 0.1s or 0.001 s. Try the following:
Number of Steps: 1
Auto Time Stepping: On
Define By: Time
Mininum Time Step: 0.001s
Maximum Time Step 0.1 s
If it still doesn't converge play around with these values (try reducing the minimum time step) and see if that helps.
Please Login to Report Topic
Please Login to Share Feed
Edit Discussion
You are navigating away from the AIS Discovery experience
The Ansys Learning Forum is a public forum. You are prohibited from providing (i) information that is confidential to You, your employer, or any third party, (ii) Personal Data or individually identifiable health information, (iii) any information that is U.S. Government Classified, Controlled Unclassified Information, International Traffic in Arms Regulators (ITAR) or Export Administration Regulators (EAR) controlled or otherwise have been determined by the United States Government or by a foreign government to require protection against unauthorized disclosure for reasons of national security, or (iv) topics or information restricted by the People's Republic of China data protection and privacy laws.
You are navigating away from the AIS Discovery experience