Learning Forum

[Peter Yip]

Hello,

I have ran the Shock Bubble Interaction (+FSI) (+3D) case here from the dynaexamples.com website here (https://www.dynaexamples.com/cese/dualcese/shockbubblefsi) 

How do I best visualize this? I see the animated gifs, but not sure how those were obtained. 

Thanks,

Peter

[Alex R.]

Hello Peter, 

The animations that you are seeing were obtained using LS-PrePost. You can download it from the Ansys web site https://lsdyna.ansys.com/download-install-overview/ . For processing multisolver models MSPost Explorer in LS-PrePost is used (upper ribbon View -> MSPost Explorer). There you will be able to see your parts and choose a desired fringe in Display Option card. Please see figure below. 

Please let me know if it worked. 

Thanks,
Alex 

[Peter Yip]

Hi Alex,

Thank you. That partially worked. Since it's in 3D, I want to slice down the middle so I did this operation: Model -> Section -> NormY and it doesn't show the contour down the slice. How do I slice and still see the contour?Thanks,

Peter

[Alex R.]

Hello Peter,

You could slice the model by blanking half of the model. Would that work for you: Element Tool -> Blank -> Area? 

Thanks,
Alex 

[Alex R.]

[Ushnish Basu]

Please ignore this post :-)

[Peter Yip]

Hi Ushnish,

I am not sure if you're saying to ignore only your post or this entire thread entirely? I still would like the ability to see contours along the plane I slice in 3D?

Thanks,

Peter

[Ushnish Basu]

Peter, 

I had posted essentially the same answer as Alex before refreshing the page, so I deleted it. Alex will help you further.

Best,

Ushnish