We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › LS Dyna › problem about *part_ADPTIVE_FAILURE › Reply To: problem about *part_ADPTIVE_FAILURE

September 29, 2023 at 2:48 pm
Ram Gopisetti
Ansys Employee

Hi Yun, 

try using SMP DP and use the solver version 13 and above, (usually the lower solver version should work with no issues as it was made Requires LS-DYNA SMP R7.1.2 (or higher) with single precision)

when we tested it, we found no issues 

cheers, RamÂ