We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Interupting client does not work!? › Reply To: Interupting client does not work!?

September 29, 2023 at 9:12 am
Rob
Forum Moderator

Stop usually works, and CTRL+C also stops the solver. You may need to hit CTRL+C a couple of times if you're running transient. 

Some operations, DPM tracks and mesh processes don't have an interrupt as doing so could corrupt the update. These processes can take a few minutes, longer if you accidentally set something incorrectly or your change/update is large relative to the compute hardware.