Reply To: HEAT module no data in the Power monitor

[Guilin Sun]

First please check if the monitor is inside the simulation region. Sometimes its 3rd dimension is not the same as the simulation region.

Make sure the material properties and the "temperature" BC injects some heats. 

You can also compare it with online examples, such as this one

https://optics.ansys.com/hc/en-us/articles/360042273574-Heat-flow-in-solids

https://optics.ansys.com/hc/en-us/articles/360042762413-Ohmic-heating-in-a-wire

you can try to rebuild the simulation file from the examples.