TAGGED: sph
-
-
September 19, 2023 at 11:27 pm
kranthi balusu
SubscriberHello,
I am receiving this error when I try to run an model with SPH part
__________
*** Error 30281 (INI+281)
SPH initialization
Material number 5
material type 20 is not implemented__________
I don't understand this error because material number 5 is not material type 20 in my model.
I would appreciate every suggestion.
Thanks,
-
September 20, 2023 at 2:01 pm
Ram Gopisetti
Ansys EmployeeHi,
what was the material model inferred there ?
Did you check the compatibility to the SPH and material in the following link
https://lsdyna.ansys.com/dynamat/
Cheers, Ram
-
September 28, 2023 at 6:22 pm
kranthi balusu
SubscriberThanks for your response, ram. Saving the k file VDEV version instead of V970 solved this problem.
I assigned this material (rigid body mat 20) to an SPH body. Material 5 was an elastic material definition that I used for another part.
-
- The topic ‘Error 30281’ is closed to new replies.
- LS-DYNA Installation Issues with Student Workbench 2024 R2
- Cross-coupled stiffness elements in LS-DYNA
- Initial Velocity Generation
- MAT072R3- concrete damage rel3 validation
- Initial Stress Shell Application and HistVarCosine in LS-DYNA
- shape memory alloy material in LS-DYNA
- *** Error 40058 (SOL+58) retractor 1000002:convergence failure at time1.01E+02
- LS-Dyna, Negative volume problem.
- Johnson-Cook material strength model and the Johnson-Cook fracture model.
- Mohr_Coulomb material model (MAT_173)
-
1987
-
896
-
599
-
591
-
408
© 2025 Copyright ANSYS, Inc. All rights reserved.