TAGGED: static-structural
-
-
September 18, 2023 at 7:19 pmBilal AkdaÄŸSubscriber
Hello, My license is 2023 R2 educational. I have a problem with importing body in static structural section. Im a solidworks user on CAD side, Just created a bridge made of lines, exported it as step file and tried to import into geometry.
this is the response I get
And this is the line body I wanted to import
This is the response I get when I create same sketch with design modeler:
Â
Please help.
-
September 18, 2023 at 8:08 pmAnkush ChoudharyAnsys Employee
Hi Bilal,
Please check out the below post.
/forum/forums/topic/how-to-use-line-bodies-in-2d-structural-analysis/
-
September 18, 2023 at 8:33 pmBilal AkdaÄŸSubscriber
I am not sure if my problem is related to that. My problem can be simplified as 2D.Â
-
-
September 19, 2023 at 6:22 amErik KostsonAnsys Employee
Hi
As mentioned in properties (Analysis Type) you need to set it to 3D as beam/lines will not work with 2D option.
To have 2D in the 3D analysis then just fix the Z - direction on all nodes and the ROTX and ROTY.
Set a snippet with:
D,ALL,UZ,0
D,ALL,ROTX,0
D,ALL,ROTY,0
That makes it 2D in principle
-
September 21, 2023 at 9:01 pmBilal AkdaÄŸSubscriber
Tried it in 3D too. Still did not work. I found the reason. There was no cross section dimensions. So when I attached a cross section dimension to sketch by design modeler, it worked. But I need something faster. A step file to be imported in sketch so I can define a cross section dimensions in the inside of ansys.
-
-
- The topic ‘Static Structural 2D line body importing problem.’ is closed to new replies.
- Problem with access to session files
- Ayuda con Error: “Unable to access the source: EngineeringData”
- At least one body has been found to have only 1 element in at least 2 directions
- Error when opening saved Workbench project
- Geometric stiffness matrix for solid elements
- How to select the interface delamination surface of a laminate?
- How to apply Compression-only Support?
- Timestep range set for animation export
- Image to file in Mechanical is bugged and does not show text
- SMART crack under fatigue conditions, different crack sizes can’t growth
-
1191
-
513
-
488
-
225
-
209
© 2024 Copyright ANSYS, Inc. All rights reserved.