CFD post initializing error

- September 16, 2018 at 8:45 pm
  
  YMAkib
  Subscriber
  
  I can't open my CFD post-processing because it is showing an error loading results state. When I am using fluent, sometimes it shows acquiring a license but I already have a license. I am adding a screenshot of the problem.
- September 17, 2018 at 10:14 am
  
  Rob
  Forum Moderator
  
  I think you're missing the results - check the warning in Line 5 of the messages. Open Solution & run an iteration and I suspect Post will work (but you still won't have any results).
- September 17, 2018 at 10:28 am
  
  YMAkib
  Subscriber
  
  I have not run the full calculation, stopped in the midway after the end of some iteration. The problem is solved for now as I have moved my data to another CFD post-processing option. Don't know what's the main reason for the problem.
- November 9, 2023 at 8:18 am
  
  chiêu nguyễn
  Subscriber
  
  hiện tại tôi cũng đang gặp phải vấn đề này ,bạn có thể hướng dẫn cho mình cách giải quyết vấn đề trên được không ạ.
- November 9, 2023 at 8:55 am
  
  Rob
  Forum Moderator
  
  The recommended workflow was changed to do the post processing in Fluent in about 2019R1, assuming you're using the current software I'd be doing that. Unless there's a good reason not to?