CFD Pressure XY Plot

- June 15, 2018 at 5:15 pm
  
  learn13
  Subscriber
  
  In the attached picture is the pressure results along the length of a 2D channel with a bump on the bottom wall.
  
  I'd like to obtain similar plots but from a 3D model. I'm thinking I'll have to define a place and get the results I'm after that's akin to the 2D data.
  
  I'd appreciate any help!
- June 15, 2018 at 6:51 pm
  
  raul.raghav
  Subscriber
  
  You can create a line in CFD-Post and plot the Pressure vs Length graph. Refer the following youtube video for reference:
  
  Skin Friction Coefficient along a Line
- June 15, 2018 at 7:00 pm
  
  vganore
  Ansys Employee
  
  Define a plane under your 3D model, and plot the pressure contours.
  
  Good option Rahul regarding plot but looks like lean 13 need a line with a bump in the middle to plot the data on that line. In that case, only creating a line may not help.
  
  I assume your 3d model would be symmetric and you would be able to select and name your required edge under ANSYS meshing to pull the line with a name under Fluent for selection. Once done, proceed for plot under Fluent.