-
-
July 25, 2023 at 7:02 amPeter8415Subscriber
Hello everyone! How can I get a FFT2D result of Radial Electromagnetic Force Density of Three-phase Induction Motor?I'll thanks a lot If one can give me a matlab script.
-
July 26, 2023 at 3:22 amReshmi RaghavanAnsys Employee
Hello Peter,
FFT can be extracted directly within Maxwell. Please look for the topic of " Perform FFT on Report" in Maxwell help. Once you have the result extracted the Perform FFT on report option from Results can be used to extract the data.
-
July 28, 2023 at 8:29 amRosalie NelsonSubscriber
Be aware that running this script will result in an error if you have not already imported the data for the radial electromagnetic force density into a variable named radial_em_force_density. It is possible that you will need to make adjustments to the script in order to accommodate the data if it is stored in a different file or format.
-
- The topic ‘FFT2D of Radial Electromagnetic Force Density of Three-phase Induction Motor’ is closed to new replies.
- HFSS Incident Plane Wave excitement mode
- Simulation of capacitor combining eddy currents with displacement currents
- How to calculate eddy and hysteresis losses of the core?
- Ansys Maxwell 3D – eddy current
- How to determine initial position in motion setup
- dq graph non-conformity
- Simplorer+Maxwell Cosimulation results and Maxwell results mismatch
- Parametrizing coil “terminals” with coil geometry
- Maxwell circuit – PWM
- On-chip inductor design
-
1497
-
599
-
591
-
591
-
366
© 2025 Copyright ANSYS, Inc. All rights reserved.