Learning Forum

[Tahywo]

Hi,

I am trying to check for the temperature distribution of tubes in a cylindrical shaped thermal shield. Because of the complexity of the geometry, I am presently looking at the two tubes at the base plate. I am having an issue with the mesh interface at the setup, also it was showing an error (Error: 0nquire-adjacent-threads: not a face thread - Error Object: #) after opening set up.

Anyone experienced something similar or with an idea on how to go about this? your help will be highly appreciated. 

 

 

 

 

[raul.raghav]

Could you attach your workbench archive file so we could take a look into it? If you're not sure how to create and share a workbench archive file, please refer: Saving & sharing of Working project files in .wbpz format

[Tahywo]

Thank you Raul.

Please find attached.

[Tahywo]

Hi, 

Also I am getting this; (Error: floating point exception Error Object: #f) error while running my simulation.

Any idea why that is?

Also I am getting this error 

[Vishal Ganore]

You have bodies in surface contact with each other. Please use shared topology option as shown below:

https://www.youtube.com/watch?v=h43E1YO1LiM&t=83s

You also need to work on meshing each part. Apply suitable mesh type and size to achieve good mesh. Default mesh option will not produce good mesh for your application.

[Tahywo]

Thank you Vishal. Will try this out.