We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › How to setup a stable sand layer by using Eulerian granular multiphase › Reply To: How to setup a stable sand layer by using Eulerian granular multiphase

July 3, 2023 at 11:17 am
Rob
Forum Moderator

Check the convergence on the steady model, chances are the solver is struggling and will then lose mass: remember the solution is the equilibrium state which means a 0.1% mass loss at inifinite time is nothing is left.

The transient model may also not be fully retaining the mass, but it's a slower process.Â