Ansys apdl coding for curved Rectangular plate

- January 24, 2018 at 3:33 pm
  
  Meik
  Subscriber
  
  Hi everyone I need to create a curved rectangular plate model in ansys apdl using coding. Using below particulars:
  Material properties: Shell element 281; Poisons ratio: 0.3, Density: 0.0000769, E :206000; Mid sec thickness : 30mm
  
  For the modelling, I need a proper coding, to run analysis under different combinations.
  Model particulars:
  b (Arc length) - 3106mm; a (width) -350mm (Distance between two arcs); Radius : 2000mm; Angle: 89 degree
  As a new user in Ansys using coding finding hard to make a coding for above model. so, if someone could help for the right commands to be used for parameters above would be great.
  Thank you