Setting the start time of a transient calculation

- February 28, 2017 at 9:55 am
  
  Nikita
  Ansys Employee
  
  How do I arbitrarily set the start time of a transient calculation?
- March 21, 2017 at 11:58 am
  
  vganore
  Ansys Employee
  
  Generally, the start time of an unsteady calculation is 0 s, but you may set the calculation start time arbitrarily by entering the following TUI command: (rpsetvar 'flow-time 0.001) For this example, 0.001 is the calculation start time.