Learning Forum

[Abdualraouf]

I am getting this error while i am checking the gab for the contacts, and some contact appear as inactive i don't understand where is the problem is , and the model fail to converge with many warnings.

any help will be very appretiated.

 

 

 *** WARNING ***                         CP =      43.594   TIME= 22:45:48
 There are no selected nodes.                                           
  Parameter _MINX will be set to 1.2676506E+30.                         

 *** WARNING ***                         CP =      43.594   TIME= 22:45:48
 There are no selected nodes.                                           
  Parameter _MINY will be set to 1.2676506E+30.                         

 *** WARNING ***                         CP =      43.594   TIME= 22:45:48
 There are no selected nodes.                                           
  Parameter _MINZ will be set to 1.2676506E+30.                         

 *** WARNING ***                         CP =      43.594   TIME= 22:45:48
 There are no selected nodes.                                           
  Parameter _MAXX will be set to -1.2676506E+30.                        

 *** WARNING ***                         CP =      43.594   TIME= 22:45:48
 There are no selected nodes.                                           
  Parameter _MAXY will be set to -1.2676506E+30.                        

 *** WARNING ***                         CP =      43.594   TIME= 22:45:48
 There are no selected nodes.                                           
  Parameter _MAXZ will be set to -1.2676506E+30.                        

 *** ERROR ***                           CP =      43.672   TIME= 22:45:48
 Node 0 is not defined.                                                 

 *** ERROR ***                           CP =      43.672   TIME= 22:45:48
 Node 0 is not defined.                                                 

 ***** WARNING  *****
 Undefined parameter used in field  3 (NX(_NTETS(_I))+_DELTA)
 Line=n,_nspr,nx(_ntets(_i))+_delta,ny(_ntets(_i)),nz(_ntets(_i))

 *** ERROR ***                           CP =      43.672   TIME= 22:45:48
 Node 0 is not defined.                                                 

 ***** WARNING  *****
 Undefined parameter used in field  4 (NY(_NTETS(_I)))
 Line=n,_nspr,nx(_ntets(_i))+_delta,ny(_ntets(_i)),nz(_ntets(_i))

 *** ERROR ***                           CP =      43.672   TIME= 22:45:48
 Node 0 is not defined.                                                 

 ***** WARNING  *****
 Undefined parameter used in field  5 (NZ(_NTETS(_I)))
 Line=n,_nspr,nx(_ntets(_i))+_delta,ny(_ntets(_i)),nz(_ntets(_i))

 *** WARNING ***                         CP =      43.672   TIME= 22:45:48
 Undefined parameter used for coordinate 1.                             
  A value of 0.0 will be used.                                          

 *** WARNING ***                         CP =      43.672   TIME= 22:45:48
 Undefined parameter used for coordinate 2.                             
  A value of 0.0 will be used.                                          

 *** WARNING ***                         CP =      43.672   TIME= 22:45:48
 Undefined parameter used for coordinate 3.                             
  A value of 0.0 will be used. 

[Ashish Khemka]

Hi,

The message 'There are no selected nodes' indicates that there are no nodes selected. Are you using a command object? If yes, then can you please ensure that the nodes are selected?

 

Regards,

Ashish Khemka

[Abdualraouf]

THANK YOU ASHISH, I AM NOT USING COMMAND OBJECT. 

when i am trying to evaluate contact tool i am facing troubles with it ''an error occurred inside the POST PROCESSING module'' , after i chaneged the reinforcemnt bar model type from ''reinforcement '' to ''beam'', i got results with contact tool.

 

its quite complex model though i am searching for a linear results.