Problem with section plane view

- February 19, 2023 at 6:29 pm
  
  mohamedobeid1412
  Subscriber
  
  Hello everyone
  I'm facing a problem with section plane during all of my simulations with different meshing techniques. In the result section, the deformed part in the geometry does not appear when using a section plane. Here a picture from the problem
  will appreciate any help.
- February 23, 2023 at 2:37 pm
  
  Chandra Sekaran
  Ansys Employee
  
  The displacements are very large (1.25 Meter?). Have you tried putting a construction surface and plotting results on the construction surface?
- February 23, 2023 at 8:18 pm
  
  mohamedobeid1412
  Subscriber
  
  Thank you very much, the construction surface fixed the problem. Although I still cannot use the section plane.