Learning Forum

[Love Bista]

I am a beginner..i imported my model on design modeler and tried to create a mesh but cannot see the model in mesh edit mode..I have intel(R) HD Graphics 620 display adapter in windows 10. I have set high performance graphics for work bench app. Please advice any solution..

[Keyur Kanade]

Please create a small box in DM and check. 

Please check followign link for supported platforms. 

Platform Support and Recommendations | Ansys

Regards,

Keyur

How to access Ansys Online Help Document

Guidelines on the Student Community

 

[Rob]

Also, please post some images. "Can't see" can be caused by an import failure, meshing failure, unsuitable graphics hardware or you missed a display button somewhere! 

[Love Bista]

dear team,

Thank you for the reply,

I created a  ox on DM and opened the mesh editor.  The box appeared in the mesh editor when i double clicked the mesh component after refresing  . But still  unable to see my project model in mesh editor. I have attached the images of both sample Box geometry and my college  project model.

[Love Bista]

finally able to view the model. set both workbench and solid works on high performance graphics. restarted the project and finally got the model on mesh editor...Cheers team

[Rob]

In other words, you've got a very thin domain relative to the length.  Given you have a 512k cell limit, need 10-ish cells across the pipe diameter for CFD (absolute minimum) and an aspect ratio of 3-5 how many cells do you reckon you'll finish up with? 

[Love Bista]

I am doing meshing in only one bore. Can you suggest if i can create infation for meshing as the diameter of pipe is smaller conpared to the far ground radious.

[Keyur Kanade]

Hello, can you please create another post for different question.