We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › General Mechanical › Changing young’s modulus in linear elastic 2D model › Reply To: Changing young’s modulus in linear elastic 2D model

September 24, 2022 at 10:32 pm
peteroznewman
Subscriber

Please describe your model in more detail if you want a better answer. I want to see the geometry, mesh, loads, supports, and material  definition.

What do you mean by 2D?  Do you mean a 2D analysis such as Plane Stress or Plane Strain?  Or do you mean you have planar surface in 3D?  Show me a copy of the Geometry Details window to confirm.

A special case where you can change the displacement and the Young's modulus and have no change in stress is the following. A straight beam with an axial displacement of 1 mm. Double the displacement and halve the Young's modulus and you will get the same stress, assuming a linear solution.