We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
Photonics

Photonics

Topics related to Lumerical and more.
  1. All Channels
  2. Photonics
  3. How to set the incident wave to TE mode

How to set the incident wave to TE mode

    • September 18, 2022 at 9:01 am
      rui fang
      Subscriber

      hello！

      I want to know how to set the incident wave to TE mode. When I select the foudmental TE,the program prompts an error .

    • September 19, 2022 at 6:16 pm
      Guilin Sun
      Ansys Employee

      Do you have a definition of TE mode? if so, please check if the "fundamental TE mode" is what you want. You can use "custom" selection and choose the mode you desire. Usually, choosing "fundamental TE mode" should be sufficient, by Lumerical definition.

      I am not sure what is the error message so I could not provide further help for this.

       

      Please refer this post Ansys Insight: 有关TE、TM偏振以及模式光源的问题

Viewing 1 reply thread
  • The topic ‘How to set the incident wave to TE mode’ is closed to new replies.
Ansys Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.