We’re updating our badges platform. Badge issuance is temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Innovation Space

FREE STUDENT SOFTWARE

Maxwell power electronics transformer simulation

- June 10, 2022 at 3:24 pm
  
  yinan
  Subscriber
  
  Hi! I encountered some problems when using Ansys Maxwell to do the simulation of a power electronic transformer, which is a 30kHz power ferrite transformer. The simulated core loss is only about 1/4 of the experimentally measured value and the winding loss is only about 1/2 of the measurement value. Has anybody encountered the same problem before? Is there any specific examples of Maxwell power electronics transformer loss simulation that would be helpful? Thank you!
- June 28, 2022 at 6:03 am
  
  NKC
  Forum Moderator
  
  Hi Yinan,
  Are you performing 2D or 3D simulation?
  If you are performing a 2D simulation, have you set the correct model depth under the design settings?
  
  Regards,
  Navya

Viewing 1 reply thread

The topic ‘Maxwell power electronics transformer simulation’ is closed to new replies.

Ansys Assistant

Hey there, you are quite inquisitive!
You have hit your hourly question limit.
Please retry after '10' minutes.
For questions, please reach out to ansyslearn@ansys.com.

RETRY

Are you sure you want to leave? The window will be closed.

OK