Ansys Learning Forum › Forums › Discuss Simulation › Materials › Can any one tell me which Material model has to be used for the plastic material ” Nylon 6/6″….? › Reply To: Can any one tell me which Material model has to be used for the plastic material ” Nylon 6/6″….?
November 2, 2021 at 4:22 am
AravindAU
Subscriber
Hi Mr. Ram
Thankyou for reply Mr. Ram.
Following are the details of the analysis.
1. Structural Analysis, specifically static structural analysis where a beam is subjected to 3 point bending.
I need to compare the max deflection that will occur while using isotropic behaviour of nylon 6/6 (which i have already done) and non linear behaviour of Nylon6/6. I have referred few literatures and they use non-linear visco-elastic material and the model is assumed to have large deformations, and the constitutive model is based on the Prony series.
What is your suggestion regarding the same.......?
1. Structural Analysis, specifically static structural analysis where a beam is subjected to 3 point bending.
I need to compare the max deflection that will occur while using isotropic behaviour of nylon 6/6 (which i have already done) and non linear behaviour of Nylon6/6. I have referred few literatures and they use non-linear visco-elastic material and the model is assumed to have large deformations, and the constitutive model is based on the Prony series.
What is your suggestion regarding the same.......?
You are navigating away from the AIS Discovery experience