We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Re: High aspect ratio › Reply To: Re: High aspect ratio

November 1, 2021 at 1:07 pm
Karthik Remella
Administrator
You don't need to solve the model. You can initialize the model and plot this wall distance. You should see the correct first layer thickness you specified for meshing the model (within reason). If you see really high or low values, then you are looking at some erroneous results.
Karthik