The flow conditions are as follows:
Gas mass flow rate: 7.620921 kg/s
Liquid mass flow rate: 276.6256 kg/s
Note, i did not patch the fluid domain because it was completely filled with liquid (initialized with liquid phase) as show below hence i felt no need for patching.
It will interest you to know that same mesh gave me a converged solution in VOF simulation as shown below.
Gas mass flow rate: 7.620921 kg/s
Liquid mass flow rate: 276.6256 kg/s
Note, i did not patch the fluid domain because it was completely filled with liquid (initialized with liquid phase) as show below hence i felt no need for patching.
It will interest you to know that same mesh gave me a converged solution in VOF simulation as shown below.
You are navigating away from the AIS Discovery experience