We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Learning Forum › Forums › Discuss Simulation › Fluids › Compare between Volume Flow Rate and calculation with Simpson 1/3 rule. › Reply To: Compare between Volume Flow Rate and calculation with Simpson 1/3 rule.

July 27, 2021 at 3:42 pm
Makara
Subscriber
I used 3 node to export the data from fluent. The velocity when I export using Node it come up with Node 1= 0.00 m/s, Node 2=0.005m/s, Node 3=0.01 m/s. But we export using Cell center. it come up with Node 2=0.00916 m/s. so I still wonder where and how fluent calculate the Cell Center?
Thank you.
Best Regards
K. Makara