Ansys Learning Forum › Forums › Discuss Simulation › Electronics › Scripting: Is there a way to delete intermediary iteration results after optimization? › Reply To: Scripting: Is there a way to delete intermediary iteration results after optimization?
July 27, 2021 at 2:25 am
AndyJP
Subscriber
No, really, there is no explanation in the manual, how to delete some specific variations basing on any kind of selection.
ListVariations and similar commands are also not explained. Any attempt to use them results in "no such property or method", or "the command requires " ", or "cannot use ( in the sub".... nonsense. Error messages unintelligible, not letting figure the command use via trial. And the command use is totally obscure.
ListVariations and similar commands are also not explained. Any attempt to use them results in "no such property or method", or "the command requires " ", or "cannot use ( in the sub".... nonsense. Error messages unintelligible, not letting figure the command use via trial. And the command use is totally obscure.
You are navigating away from the AIS Discovery experience