We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
Electronics

Electronics

Topics related to HFSS, Maxwell, SIwave, Icepak, Electronics Enterprise and more.
  1. All Channels
  2. Electronics
  3. Maxwell_some points with 0V and resistance=0

Maxwell_some points with 0V and resistance=0

    • April 19, 2022 at 2:46 pm
      Debora_Pereira
      Subscriber

      I'm simulating four coils and a target rotating over them. This target rotates in steps of 4 degrees and I get some with 0V and 0 ohms. I dont get any error, can anyone help me?

      Sem título.png
    • April 28, 2022 at 6:14 am
      Navya C
      Ansys Employee
      Hi @Debora_Pereira Is the value zero or too small. Double click on the value and use a scientific calculation to see if it is a small value.
      Check if the simulation is converging at every point. I am not sure how is the excitation in your model.
      The screenshot says Matrix L(). Is it the resistance or inductance you are talking about?

      Regards Navya
Viewing 1 reply thread
  • The topic ‘Maxwell_some points with 0V and resistance=0’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.