-
-
March 28, 2022 at 12:21 pm
EagerToLearn
SubscriberHello,
can anyone tell men, which elements are used in the material designer? SOLID92(10)?
Regards
Mike
March 30, 2022 at 1:00 pmAshish Khemka
Forum Moderator
Please see if the following link helps:
Material Designer introduced in 19.2 ÔÇö Ansys Learning Forum
Find the element and material using the element or material ID ÔÇö Ansys Learning Forum
Regards Ashish Khemka
Viewing 1 reply thread- The topic ‘Material Designer – Which elements are used?’ is closed to new replies.
Ansys Innovation SpaceTrending discussions- The legend values are not changing.
- LPBF Simulation of dissimilar materials in ANSYS mechanical (Thermal Transient)
- Convergence error in modal analysis
- APDL, memory, solid
- How to model a bimodular material in Mechanical
- Meaning of the error
- Simulate a fan on the end of shaft
- Nonlinear load cases combinations
- Real Life Example of a non-symmetric eigenvalue problem
- How can the results of Pressures and Motions for all elements be obtained?
Top Contributors-
3862
-
1414
-
1231
-
1118
-
1015
Top Rated Tags© 2025 Copyright ANSYS, Inc. All rights reserved.
Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.
-

Ansys Assistant

Welcome to Ansys Assistant!
An AI-based virtual assistant for active Ansys Academic Customers. Please login using your university issued email address.

Hey there, you are quite inquisitive! You have hit your hourly question limit. Please retry after '10' minutes. For questions, please reach out to ansyslearn@ansys.com.
RETRY