We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.
General Mechanical

General Mechanical

Topics related to Mechanical Enterprise, Motion, Additive Print and more.
  1. All Channels
  2. General Mechanical
  3. Solid bodies are not permitted in ANSYS AQWA

Solid bodies are not permitted in ANSYS AQWA

TAGGED: , , , ,

    • December 20, 2021 at 6:45 am
      haruroslan
      Subscriber

      Morning,

      I have been facing this error for the whole week and am unable to find any solutions regarding this.

      Would like some insight on what I can do to make this work, currently running the latest ANSYS.

      Aside from this, when I want to mesh, "part 13" appears to be missing. I can un-suppress it and show visibility, however, the simulation will not run.

      image.png
    • December 20, 2021 at 1:35 pm
      Yu Bi
      Ansys Employee
      Hi, I don't know what part 13 looks like as I didn't see it in the picture. However, my suggestion is you can first try to check/ repair the geometry in the SpaceClaim and then use the external mesh tool (the one in the Workbench toolbox on the left of the project schematic) instead to do the mesh. When using the external mesh tool, please select the Physics Preference to Hydrodynamics. Besides, please make sure the structure hasn't been suppressed for physics in the SpaceClaim, and if you suppress it in Aqwa editor and want to include it again, you need to also reselect the Excluded structure in the Structure Selection Detail Panel.
Viewing 1 reply thread
  • The topic ‘Solid bodies are not permitted in ANSYS AQWA’ is closed to new replies.
Ansys Innovation Space

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.