Learning Forum

[ssssss]

Hi all,

I am trying to transfer the results of the an Abaqus analysis to Ls-Dyna and continue my analysis in Ls-Dyna (initial stress-stress-deformed shape etc.. will be the output of the Abaqus results). I was wondering if there is a way of doing that?

Thanks

[ErKo]

Hi

ODB result files can not been opened/used in LS-Dyna.

LS Pre Post can though import to a certain extent abaqus .inp file which are text files.

All the best

Erik

[ssssss]

Thank you very much Erik, is there a way to transfer Abaqus output so that Ls-Dyna could import and read? I have tried Nastran but I guess it accepts the undeformed model (the job file (.inp)) file but not the output one
Thank you very much once again

[vikaskaul]

If it is just the deformed shape, then all you need to do is export the mesh (using the Python API that comes baked in with the Abaqus/Viewer, perhaps), do some basic manipulation of the text file so that it can be read by LS-DYNA.
On the other hand, if you are thinking of consuming stress/strain/.. fields from one solver to another, chances are you are better off switching straight to Dyna and doing it all in one code. Otherwise, it is going to be a non-trivial undertaking.