Boundary conditions of rigid body in static simulation

- July 13, 2021 at 7:15 am
  
  Haiquan
  Subscriber
  
  Hello
  How to apply boundary conditions to rigid body in static simulation? I also found that there is no mesh in rigid body after finishing meshing.
- July 13, 2021 at 7:32 am
  
  Erik Kostson
  Ansys Employee
  
  Hi
  
  That is correct.
  
  A remote displacement can be defined on a rigid body.
  
  All the best
  
  Erik
- July 13, 2021 at 7:47 am
  
  Haiquan
  Subscriber
  
  Thank you very much for your quick response! So if I need the fixed condition for rigid body, what I should do is to scope any face of the rigid body, input 0 for all DOFs, and most important, behavior should be rigid as shown below, is it correct?
- July 13, 2021 at 8:42 am
  
  Erik Kostson
  Ansys Employee
  
  HI
  I never use rigid bodies, so I would suggest to
  Try things out and see how it works.
  
  Erik
- July 13, 2021 at 9:14 am
  
  Haiquan
  Subscriber
  
  Thank you very much for your help!