Learning Forum

[edc5]

[1shan]

ANSYS Staff are not allowed to download attachments. You could copy past the output in the textbox. Also, After you open workbench again what do you see. Is the solution marked completed?
Regards Ishan.

[edc5]

Sure, here is the output from the last calculation and final processing:
HT FLOW CONVERGENCE VALUE=152.6CRITERION=0.4078
EQUIL ITER1 COMPLETED.NEW TRIANG MATRIX.MAX DOF INC=0.5684
HT FLOW CONVERGENCE VALUE=0.5362E-01CRITERION=0.4352<<< CONVERGED
>>> SOLUTION CONVERGED AFTER EQUILIBRIUM ITERATION1
*** LOAD STEP76SUBSTEP13COMPLETED.**** ITER =1198
*** TIME =7.60000TIME INC =0.600000E-02
****************************************************
*************** FINISHED SOLVE FOR LS 76 *************

*GET_WALLASOLFROMACTIITEM=TIME WALLVALUE=21.3919444

FINISH SOLUTION PROCESSING


***** ROUTINE COMPLETED *****CP =6561.328



*** ANSYS - ENGINEERING ANALYSIS SYSTEMRELEASE 2020 R120.1***
DISTRIBUTED ANSYS Mechanical Enterprise

99000002VERSION=WINDOWS x6421:36:24JUN 20, 2021 CP=6561.328

NozzleCoupledSimsJune2021Revision--Transient Thermal (D5)



***** ANSYS RESULTS INTERPRETATION (POST1) *****

*** NOTE ***CP =6561.375TIME= 21:36:24
Reading results into the database (SET command) will update the current
displacement and force boundary conditions in the database with the
values from the results file for that load set.Note that any
subsequent solutions will use these values unless action is taken to
either SAVE the current values or not overwrite them (/EXIT,NOSAVE).

Set Encoding of XML File to:ISO-8859-1

Set Output of XML File to:
PARM,,,,,,,,,,, ,,,,,,
DATABASE WRITTEN ON FILEparm.xml

EXIT THE ANSYS POST1 DATABASE PROCESSOR


***** ROUTINE COMPLETED *****CP =6561.422



PRINTOUT RESUMED BY /GOP

*GET_WALLDONEFROMACTIITEM=TIME WALLVALUE=21.6066667

PARAMETER _PREPTIME =1.000000000

PARAMETER _SOLVTIME =6213.000000

PARAMETER _POSTTIME =773.0000000

PARAMETER _TOTALTIM =6987.000000

*GET_DLBRATIOFROMACTIITEM=SOLU DLBRVALUE=1.15276956

*GET_COMBTIMEFROMACTIITEM=SOLU COMBVALUE=773.173114
--- Number of total nodes = 64235
--- Number of total elements = 314919
--- Element load balance ratio = 1.15276956
--- Time to combine distributed files = 773.173114

EXIT ANSYS WITHOUT SAVING DATABASE


NUMBER OF WARNING MESSAGES ENCOUNTERED=79
NUMBER OF ERRORMESSAGES ENCOUNTERED=0

*** NOTE ***CP =6562.438TIME= 21:36:25
The solution for the current simulation was performed using 4 cores.
The parallel performance of this simulation on this hardware indicates
that this simulation would benefit from using additional CPU cores.
Consider using more CPU cores, which may require additional HPC
licenses, when running this simulation again on the same hardware.

+--------- D I S T R I B U T E DA N S Y SS T A T I S T I C S ------------+

Release: 2020 R1Build: 20.1Update: UP20191203Platform: WINDOWS x64
Date Run: 06/20/2021Time: 21:36Process ID: 21320
Operating System: Windows 10(Build: 19041)

Processor Model: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz

Compiler: Intel(R) FORTRAN Compiler Version 19.0.0(Build: 20190206)
Intel(R) C/C++ Compiler Version 19.0.0(Build: 20190206)
Intel(R) Math Kernel Library Version 2019.0.3 Product Build 20190125

Number of machines requested:1
Total number of cores available:8
Number of physical cores available:4
Number of processes requested:4
Number of threads per process requested :1
Total number of cores requested:4 (Distributed Memory Parallel)
MPI Type: INTELMPI
MPI Version: Intel(R) MPI Library 2018 Update 3 for Windows* OS


GPU Acceleration: Not Requested

Job Name: file0
Input File: dummy.dat

CoreMachine NameWorking Directory
-----------------------------------------------------
0DESKTOP-TEGR4MHC:\Users\Eli Case\Documents\Nozzle Project\Simulations June 2021 Revision - Copy\_ProjectScratch\ScrB4F9
1DESKTOP-TEGR4MHC:\Users\Eli Case\Documents\Nozzle Project\Simulations June 2021 Revision - Copy\_ProjectScratch\ScrB4F9
2DESKTOP-TEGR4MHC:\Users\Eli Case\Documents\Nozzle Project\Simulations June 2021 Revision - Copy\_ProjectScratch\ScrB4F9
3DESKTOP-TEGR4MHC:\Users\Eli Case\Documents\Nozzle Project\Simulations June 2021 Revision - Copy\_ProjectScratch\ScrB4F9

Latency time from master to core1 =2.708 microseconds
Latency time from master to core2 =2.802 microseconds
Latency time from master to core3 =3.461 microseconds

Communication speed from master to core1 =2849.55 MB/sec
Communication speed from master to core2 =3961.81 MB/sec
Communication speed from master to core3 =3849.04 MB/sec

Total CPU time for main thread:6556.8 seconds
Total CPU time summed for all threads:6562.4 seconds

Elapsed time spent obtaining a license:0.9 seconds
Elapsed time spent pre-processing model (/PREP7):0.9 seconds
Elapsed time spent solution - preprocessing:39.5 seconds
Elapsed time spent computing solution:6168.6 seconds
Elapsed time spent solution - postprocessing:773.2 seconds
Elapsed time spent post-processing model (/POST1) :0.0 seconds

Equation solver used:Sparse (symmetric)
Equation solver computational rate:35.5 Gflops
Equation solver effective I/O rate:15.6 GB/sec

Maximum total memory used:1396.0 MB
Maximum total memory allocated:5184.0 MB
Total physical memory available:16 GB

Total amount of I/O written to disk:678.0 GB
Total amount of I/O read from disk:2094.9 GB

+------ E N DD I S T R I B U T E DA N S Y SS T A T I S T I C S -------+


*---------------------------------------------------------------------------*
||
|DISTRIBUTED ANSYS RUN COMPLETED|
||
|---------------------------------------------------------------------------|
||
| Ansys 2020 R1Build 20.1UP20191203WINDOWS x64 |
||
|---------------------------------------------------------------------------|
||
| Database Requested(-db)1024 MBScratch Memory Requested1024 MB |
| Maximum Database Used211 MBMaximum Scratch Memory Used280 MB |
||
|---------------------------------------------------------------------------|
||
|CP Time(sec) =6562.438Time=21:36:25|
|Elapsed Time (sec) =6990.000Date=06/20/2021|
||
*---------------------------------------------------------------------------*

[edc5]

Additionally, the solution is not marked as completed in Ansys workbench. The lighting bolt icon remains next to the solution step in the transient thermal workflow after the calculation concludes, as mechanical crashes shortly after completion.