Maxwell Simplorer co-simulation with rotational speed value increasing from zero to maximum

- June 4, 2021 at 8:27 am
  
  Higgsco
  Subscriber
  
  Hi, I want to simulate SRM made in Maxwell. I made the whole control system and I can simulate it fine with given constant speed but all I want is to simulate it with rotational speed value increasing from zero to maximum. Should I use some special element attached to MotionSetup1_In? I would really appreciate any sort of help
- June 7, 2021 at 4:46 pm
  
  Higgsco
  Subscriber
  
  Is there any chance someone is able to help me? It's quite important, not gonna lie.
- June 9, 2021 at 3:00 pm
  
  DELI
  Ansys Employee
  
  Simplorer/Twinbuilder has a wide variety of component, you can right mouse click on v_rotb1->component help. And you can load example of this component with other mechanical components.
  
  There are lot of Maxwell examples come with installation:
- June 9, 2021 at 3:08 pm
  
  HDLI
  Ansys Employee
  
  Hello Higgsco To simulate transient starting performance, we have to build speed and current closed loop control, or can manually define ramping speed and current related to this speed.
  We could also use VM_ROTB (angular speed) or SM_ROTB (position) to calculate or get rotor position and then determine current by suing the position.
  We may have some references, such as IEEE papers "Modelling of Switched Reluctance Motor Drive based on Ansys Simplorer" and "Performance Analysis of Switched Reluctance Motor Based on Maxwell and Simplorer", etc.
  Thanks.
- September 1, 2021 at 3:14 pm
  
  Higgsco
  Subscriber
  
  Deear HDLI,
  Would you mind taking a look at my recent question where I described my problem more specify?
  /forum/discussion/31116/twin-builder-and-maxwell-cosimulation-of-reluctance-motor#latest
- September 1, 2021 at 4:01 pm
  
  HDLI
  Ansys Employee
  
  Please see /forum/discussion/31116/twin-builder-and-maxwell-cosimulation-of-reluctance-motor#latest
  HDLI